Marine Fire Suppression System >> FM-200 Fire Extinguishing System >> FM-200 Fire Extinguishing System
 |
||||||
| Porduct No. | MFFE007-FM200 | |||||
| Main Technical Parameters | ||||||
| Standard | Q/HF123-2007 | |||||
| System performance | fixed£¬total flooding type£¬fire extinguishing agent injection time ¡Ü10S | |||||
| Operation mode | Pneumatic remote control operation or manual mechanical£¨Operating Force¡Ü98N£© | |||||
| Environmental condition | ambient temperature | -10¡æ-50¡æ | ||||
| relative temperature | 93¡À3% | |||||
| Power supply | main power source | AC220V 50Hz | ||||
| Auxiliary power supply | DC24V 3A | |||||
| Storage device performance | ||||||
| Storage container volume(L) | 40¡¢70¡¢90¡¢100¡¢120¡¢150¡¢180 | |||||
| Fire extinguishing agent filling rate(kg/m3) | ¡Ü1120 | |||||
| storage pressure(20¡æ) | 4.2MPa | |||||
| MWP(maximum working pressure)(50¡æ) | 6.7MPa | |||||
| start method | remote operation & manual mechanical | |||||
| Remote control release station performance | ||||||
| Storage container volume(L) | 4 | |||||
| storage pressure £¨20¡æ£© | 6.0MPa | |||||
| Pneumatic time-delay device | delay time 20S-40S | |||||
| start method | manual mechanical | |||||
| Pneumatic cast valve performance | ||||||
| Nominal pressure£¨mm£© | 25¡¢32¡¢40¡¢50¡¢65¡¢80¡¢100¡¢125¡¢150 | |||||
| Working pressure£¨MPa£© | 10.0MPa | |||||
| Start method | remote operation & manual mechanical | |||||
| additional function | Equipped with stroke switch, provide a normally open and a normally closed contacts | |||||
| The agent would extinguish following fire | ||||||
| electric fire | ||||||
| liquid fire or melting solid fire | ||||||
| solid surface fire | ||||||
| gas fire that the gas would be elimilated before fire extinguishing | ||||||
| Mairne fire extinguishing system could be placed in the shipping engine room,pump cabin, hold,oil cabin,generate electricity room,paint room,woodworker room, kitchen and so on. | ||||||
