Marine Welding Materials >> Welding Wire >> Flux cored Wire >> E81T1-B2CFlux Cored Wire AWS E81T1-B2C
 |
||||||||||
| Product Name | Flux cored Wire | |||||||||
| Product No. | MHAE421-WW017 | |||||||||
| Standard | ||||||||||
| GB | GB/T 17493-1998 | |||||||||
| AWS | AWS A5.29 E81T1-B2C | |||||||||
| Welding Wire Type | Titania Heat Resistant Steel Flux-Cored Wires | |||||||||
| Welding Position | F,V,OH,H | |||||||||
| Chemical Composition | C | Mn | Si | S | P | Cr | Ni | Mo | Cu | V |
| Typical | 0.058 | 0.8 | 0.25 | 0.01 | 0.011 | 1.15 | 0.45 | |||
| Mechanical Properties of Deposited Metal | ||||||||||
| Test Item | Yield Point ReL (MPa) | Tensile Strength Rm (MPa) | Elongation A 4(%) | Akv1(J)Tem | Shield Gas | |||||
| Temp. (¡æ) | Joule | |||||||||
| Typical | 550 | 630 | 23 | 25 | 75 | CO2 | ||||
| Application | ||||||||||
| Suitable for welding 550MPa grade heat resistant low alloy steel structures,which work temperature lower than 520¡æ,e.g.15CrMoR (1%Cr-0.5%Mo). Welded piece should be preheated to 150-300¡æ before welding. | ||||||||||
