Marine Pipe >> Seamless Steel Pipe >> Carbon Steel Pipe >> ASTM PipeASTM A106/SA106 Seamless Carbon Steel Pipe
กก |
|||||||
| Product Name: | ASTM A106/SA106 Seamless Carbon Steel Pipe | ||||||
| Application: | oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gasses that exhibit higher temperatures and pressure levels. | ||||||
| Product NO: | NPS(DN) | wall thickness(OVER) | wall thickness(UNDER) | ||||
| inch | mm | inch | mm | inch | mm | ||
| MFVE405-ASTM01 | 1/8 to 1-1/2 | 6-40 | 1/64 (0.015) | 0.4 | 1/64 (0.015) | 0.4 | |
| MFVE405-ASTM02 | 1-1/2 to 4 | 40-100 | 1/32 (0.031) | 0.8 | 1/32 (0.031) | 0.8 | |
| MFVE405-ASTM03 | 4 to 8 | 100-200 | 1/16 (0.062) | 1.6 | 1/32 (0.031) | 0.8 | |
| MFVE405-ASTM04 | 8 to 18 | 200-450 | 3/32 (0.093) | 2.4 | 1/32 (0.031) | 0.8 | |
| MFVE405-ASTM05 | 18 to 26 | 450-650 | 1/8 (0.125) | 3.2 | 1/32 (0.031) | 0.8 | |
| MFVE405-ASTM06 | 26 to 34 | 650-859 | 5/32 (0.156) | 4 | 1/32 (0.031) | 0.8 | |
| MFVE405-ASTM07 | 34 to 48 | 850-1200 | 3/16 (0.187) | 4.8 | 1/32 (0.031) | 0.8 | |
| Chemical Composition(% max) | |||||||
| steel Grade | Grade A | Grade B | Grade C | Total of Cr, Cu, Mo, Ni, and V shall not exceed 1% | |||
| Carbon | 0.25 | 0.3 | 0.35 | ||||
| Manganese | 0.27 to 0.93 | 0.29 to 1.06 | 0.29 to 1.06 | ||||
| Phosphorous | 0.035 | 0.035 | 0.035 | ||||
| Sulfur | 0.035 | 0.035 | 0.035 | ||||
| Silicon | 0.1 | 0.1 | 0.1 | ||||
| Chrome | 0.4 | 0.4 | 0.4 | ||||
| Copper | 0.4 | 0.4 | 0.4 | ||||
| Molybdenum | 0.15 | 0.15 | 0.15 | ||||
| Nickel | 0.4 | 0.4 | 0.4 | ||||
| Vanadium | 0.08 | 0.08 | 0.08 | ||||
| Manufacture:Hot-Finished or Cold-drawn | |||||||
| Pipe Length:Specific or Random | |||||||
| Mechanical Properties:(psi/min) | |||||||
| Steel Grade | Tensile Strength | Yield Strength | |||||
| A | 48000 | 30000 | |||||
| B | 60000 | 35000 | |||||
| C | 70000 | 40000 | |||||
